Seco-Larm E-960-D90GQ Enforcer Twin Photobeam Detectors - 190'

ENFORCER Long Range Photobeam Detectors are easy-to-install with laser beam alignment and provide extended range. Designed to provide reliable perimeter security both indoors and outdoors.

Features

• Twin beams provide reliable perimeter security, minimizing false alarms from birds, falling leaves, etc.
• Lensed optics reinforce beam strength and provide excellent immunity to false alarms due to rain, snow, mist, etc.
• Weatherproof, sunlight-filtering case for indoor and outdoor use
• Non-polarized power inputs
• Automatically adjusts beam strength to compensate for different weather conditions
• Automatic input power filtering with special noise rejection circuitry
• NO/NC trigger output
• N.C. tamper circuit included
• Quick, easy installation with built-in laser beam alignment system

Specifications

• 90' (30m) Max. range (outdoor)
• 190' (60m) Max. range (indoor)
• 50mA max. (laser alignment only) Current draw
• 150mA max. (active operation excluding laser alignment)
• 12~30 VDC/VAC 60Hz, 200mA Operating Voltage
• Simultaneous breaking of 2 beams Detection method
• 10ms Interrupt speed
• SPDT NO/NC/COM relay, 1A@30 VDC/VAC, with built-in 10kΩ resistor on N.O. output
• N.C. switch, 1A@30 VDC/VAC Tamper output (TX & RX)
• Sensor LED (RX): Red LED – ON: When the transmitter and receiver are not aligned or the beam is broken.
• Signal LED (RX): Yellow LED – ON: When the receiver's signal is weak or the beam is broken.
• Power LED (TX & RX): Green LED ON: Indicates connected to power
• 650nm Laser wavelength
• <5mW Laser output power
• Horizontal: ±90°, Vertical: ±5° Alignment angle
• -13°~131° F (-25°~55° C) Operating temperature
• PC Resin Case