Seco-Larm E-931-S33PRGQ Enforcer IR Reflective Photo Eye - Polarized / 33'

The E-931-S33PRGQ 33ft Polarized Reflective Photoelectric Beam Sensor provides reliable detection of shiny objects that could be missed by a non-polarized sensor.

Features

• Polarized sensor is immune to shiny objects: triggers only when correctly reflected light is detected
• Weatherproof (IP55)
• Anti-condensation housing
• 12-30V DC/AC 60Hz, 100mA
• Up to 33ft (10m) sensing range
• Round reflector, Diameter: 3-1/4" (82mm)
• Form C relay: 500mA@30VAC/VDC
• Beam status LED
• Compact size: 4-13/16"x2-3/8"x2-7/16" (122x60x62mm)
• N.C. Tamper switch: 500mA@30VAC/VDC
• Monitored Outputs: N.C. | 10kΩ Resister

Specifictions

• Reflective photoelectric beam sensor Type
• Standby – 55mA@12VDC, Active – 40mA@12VDC Current Draw
• Up to 50' (15m) Sensing Range
• 12-30V DC/AC 60Hz, 100mA Operating Voltage
• 10ms Reaction time
• IR LED Light Source
• LEDs – Red: Solid, No beam signal, triggered
• LEDs – Green: Solid, Good beam signal, properly aligned
• LEDs: Alternating Flash – Poor beam signal
• SPDT relay output (NO/NC/COM) Alarm Output
• 500mA@30VAC/VDC Switching Capacity
• 500mA@30VAC/VDC Tamper Switch
• -13°~140° F (-25°~60° C) Operating Temperature
• Weatherproof IP55 Enclosure