Nice Hysecurity DCPS-120 DC Power Supply w/ HyCharger - Up to 2 HP Operators

24VDC UPS, Uninterruptable Power Supply, for HySecurity hydraulic industrial operators. The DC battery backup can only be integrated with DC motordriven hydraulic industrial operators, thus, DC motor based hydraulic operators are purchased together with a DC Power Supply as an integrated pair. See individual hydraulic operator models for specifications.

Available in single phase only. Low voltage: 115V 50/60Hz (requires 30A branch circuit), or High voltage: 208-230V 50/60Hz (requires 15A branch circuit). Be certain to order the correct DC Power Supply voltage model as chargers are not field convertible.

Note: If a UPS is needed for an existing AC installation, consider using the AC Power Supply with HyInverter AC. (HySecurity does not support or warranty field conversions of AC powered operators to DC powered to add a battery backup. If a DC gate operator is to have a DC battery back-up, it must be ordered as a system from the factory to comply with the UL/ETL test certification we've obtained.)

Install Note: HySecurity DC Power Supply enclosure must be mounted within 10 ft (3 m) of the operator with a minimum of 6 gauge wire used to connect between the DC supply and gate operator. For longer distances, call HySecurity Tech Support.

UPS models include DC Power Supply in operator model price. Includes two 110Ah sealed, AGM batteries for extended cycles.

• Operators: SlideDriver II SD40DC, SD200VDC; SlideDriver 15 UPS, 30F UPS, 40 UPS, 80 UPS, 200 UPS; StrongArm 14F UPS, 20 UPS, 28 UPS, 36 UPS; SwingRiser - All UPS models; HydraLift - All UPS models (includes 1 and 2 hp operators)
• Temperature Rating: -40° to 158°F (-40° to 70°C) Heater & fan automatically adjust cabinet temperature for optimal battery life
• Single Phase Voltages: 115 or 208-230V 50/60Hz Single Phase
• Batteries: Two - 110Ah AGM batteries for extended cycles
• Enclosure: NEMA 3R with heater and fan
• ETL Listed: UL 325
• Burst Mode: Burst of power, when needed
• Charger: Smart charge system conditions battery
• Output Power: 24V, 50A
• Recharge: Fast: Minimum 2 hour recharge; 12 hours for high cycle applications
• Warranty: 2 year (system and electronics), 1 year battery