EMX 2650-1 ULT-MVP-U Inductive Loop Detector - Single Channel

Overview

The ULTRA-MVP multi-voltage vehicle loop detector combines small size with a 12VDC to 240VAC input range. Reduce inventory costs by stocking and transporting just one universal unit.

This detector features DETECT-ON-STOP™ or (DOS) technology, which allows detection only when a vehicle has come to a complete stop on the loop. This exclusive feature is unique to EMX and is a major advantage if you want to ignore cross traffic in tight spaces.

The ULT-MVP provides two relay outputs – one for indicating vehicle presence and a second for loop fault or pulse on entry/pulse on exit, or DETECT-ON-STOP.

This detector is also available in a two channel unit — the ULT-MVP-2.

Features

The ULTRA-MVP differentiates itself from other vehicle loop detectors because of its versatile features:

• Single or dual channel unit for US or EU wiring
• ULTRAMETER™ displays optimum sensitivity setting/crosstalk interference
• 10 sensitivity settings
• 4 operating frequencies
• Automatic sensitivity boost (ASB), delay, fail-safe/fail-secure and infinite or normal (5 min.) presence
• Small size: 73 x 38 x 78mm
• Socket mount -11 pin (JEDEC B11-88)
• CE compliant
• DETECT-ON-STOP™ allows detection only when a vehicle has come to a complete stop on the loop

Specifications

• Sensitivity: 10 levels, 0-9
• ULTRAMETER™ Display: Indicates optimum sensitivity level, 0-9 Diagnostic aid
• Loop frequency: 4 settings (low, med-low, med-hi, high)
• Loop inductance: 20 — 2000μH (Q factor > 5)
• Grounded loop: Isolation transformer allows operation with poor quality loops
• Automatic tuning: Detector tunes to loop on power-up and following frequency count function
• Environmental tracking: Automatic compensation
• Surge protection: Loop circuitry protected by surge suppressors
• Presence relay: SPDT relay contacts (form C)
• Output B relay: SPDT relay contacts (form C)
• Contact rating (resistive load): 2A @ 30VDC, 0.5A @ 125VAC
• Power / loop fault indicator: Green LED
• Detect / frequency count indicator: Red LED
• Detect-On-Stop: Requires vehicle to stop for a minimum of 1 second (1-2s typical)
• ASB (Automatic Sensitivity Boost): Increases sensitivity after initial detection to prevent dropout due to high-bed vehicles
• Power: 12 — 60 VDC (Max. 0.8 VA) 12 — 240 VAC (48 — 62Hz) (Max. 1.4 VA)
• Operating current: 20mA standby / 50mA detect
• Operating temperature: -40°C — 82°C (-40°F — 180°F) 0 — 95% relative humidity
• Dimensions (L x W x H): 73mm (2.9") x 38mm (1.2") x 78mm (3.1")
• Weight: 0.25 lbs. (113 g)
• Housing: ABS plastic, IP30
• Connections: Socket mount – 11 pin male (JEDEC B11-88)