EMX 2630-1 ULT-MVP-2U Inductive Loop Detector - Two Channels

The ULTRA-MVP-2 two channel, multi-voltage vehicle loop detector combines small size with a 12VDC to 240VAC input range. Reduce inventory costs by stocking and transporting just one universal unit.

This detector features DETECT-ON-STOP™ or (DOS) technology, which allows detection only when a vehicle has come to a complete stop on the loop. This exclusive feature is unique to EMX and is a major advantage if you want to ignore cross traffic in tight spaces.

The ULT-MVP-2 two channel multi-voltage vehicle loop detector provides AB logic (directional mode) and one set of relays for each channel. Each output may be set for presence, normal (5 min.) or infinite presence, or DETECT-ON-STOP.

Features

• Single or dual channel unit for US or EU wiring
• ULTRAMETER™ displays optimum sensitivity setting/crosstalk interference
• 10 sensitivity settings
• 4 operating frequencies
• Automatic sensitivity boost (ASB), delay, fail-safe/fail-secure and infinite or normal (5 min.) presence
• Small size: 73 x 38 x 78mm
• Socket mount -11 pin (JEDEC B11-88)
• CE compliant
• DETECT-ON-STOP™ allows detection only when a vehicle has come to a complete stop on the loop

Specifications

• Sensitivity: 10 levels, 0-9
• ULTRAMETER™ Display: Indicates optimum sensitivity level, 0-9 Diagnostic aid
• Loop frequency: 4 settings (low, med-low, med-hi, high)
• Loop inductance: 20—2000µH (Q factor > 5)
• Grounded loop: Isolation transformer allows operation with poor quality loops
• Automatic tuning: Detector tunes to loop on power-up and following frequency count function
• Environmental tracking: Automatic compensation
• Surge protection: Loop circuitry protected by surge suppressors
• Channel 1 relay: SPST relay contacts (form A)
• Channel 2 relay: SPST relay contacts (form A)
• Contact rating (resistive load): 2A @ 30VDC, 0.5A @ 125VAC
• Detect / channels 1 and 2: Red LED
• Detect-On-Stop: Requires vehicle to stop for a minimum of 1 second (1-2s typical)
• ASB (Automatic Sensitivity Boost): Increases sensitivity after initial detection to prevent dropout due to high-bed vehicles
• Power: 12—60 VDC (Max. 1.0 VA) 12—240 VAC (48—62Hz) (Max. 2 VA)
• Operating current: 37mA standby / 55mA detect
• Operating temperature: -40°C—82°C (-40°F—180°F) 0—95% relative humidity
• Dimensions (L x W x H): 73mm (2.9") x 38mm (1.2") x 78mm (3.1")
• Housing: ABS plastic, IP30
• Connections: Socket mount — 11 pin male (JEDEC B11-88)
• MADE IN USA