EMX 2600-1 ULT-DIN Inductive Loop Detector - Din Rail Mount

The ULTRA-DIN vehicle loop detector combines small size with full-featured functionality in a DIN rail mount module.

The ULT-DIN features DETECT-ON-STOP™ or (DOS) technology, which allows detection only when a vehicle has come to a complete stop on the loop. This exclusive feature for our DIN rail mount vehicle loop detector is unique to EMX and is a major advantage if you want to ignore cross traffic in tight spaces.

The ULT-DIN provides relay contact outputs indicating vehicle presence and a set of output contacts for loop fault or pulse on entry/pulse on exit, or DETECT-ON-STOP.

Features

• DIN rail mount — 35mm width
• ULTRAMETER™ displays optimum sensitivity setting/crosstalk interference
• DETECT-ON-STOP™ allows detection only when a vehicle has come to a complete stop on the loop
• 10 sensitivity settings
• 4 operating frequencies
• Automatic sensitivity boost (ASB), delay, fail-safe/fail-secure and infinite or normal (5 min.) presence
• Small size: 80 x 23 x 84 mm
• Set of output contacts for loop fault or pulse on entry /pulse on exit, or the new EMX feature, DETECT-ON-STOP™
• CE compliant

Specifications

• Sensitivity: 10 levels, 0-9
• UltraMETER™ display: Indicates optimum sensitivity level, 0-9 Diagnostic aid
• Loop frequency: 4 settings (low, med-low, med-hi, high)
• Loop inductance: 20—2000µH (Q factor > 5)
• Grounded loop: Isolation transformer allows operation with poor quality loops
• Automatic tuning: Detector tunes to loop on power-up and following frequency count function
• Environmental tracking: Automatic compensation
• Surge protection: Loop circuitry protected by surge suppressors
• Presence relay: SPDT relay contacts (form C)
• Output B relay: SPST relay contact (form A) (available on ULT-DIN only)
• Contact ratings: 1A @ 24VDC—120VAC
• Power / loop fault indicator: Green LED
• Detect / frequency count indicator: Red LED
• Detect On Stop: Requires vehicle to stop for a minimum of 1 second (1-2s typical) (available on ULT-DIN only)
• ASB (Automatic Sensitivity Boost): Increases sensitivity after initial detection to prevent dropout due to high-bed vehicles
• Power: 12VDC—24VDC, 24VAC
• Operating current: 15mA standby / 45mA detect
• Operating temperature: -40°C—82°C (-40°F—180°F) 0—95% relative humidity
• Dimensions (L x W x H): 80mm (3.2") x 23mm (0.9") x 84mm (3.3")
• Mounting method: DIN rail mount — 35mm width
• Connections: ULT-DIN 10 screw terminals, ULT-DIN-1 8 screw terminals
• MADE IN USA