EMX 2322-2 LRS-LC Loop Replacement System Logic Interface

It is no longer necessary to make 9 cuts to monitor vehicle presence —

The Loop Replacement System (LRS) features advanced 3-axis, magnetoresistive sensing technology that responds to changes in the Earth's magnetic field caused by ferrous objects. Three sensing elements provide measurements in the X, Y and Z axes to improve detection sensitivity when used in either above or below ground installations.

The LRS is equipped with our new DETECT-ON-STOP™ or (DOS®) feature, which allows detection only when a vehicle has come to a complete stop. This EMX exclusive feature is a major advantage if you want to ignore cross traffic in tight spaces.

The detector's compact, loop-less design reduces installation costs when compared to traditional inductive loop technology.

Features

• Three-dimensional presence detection of vehicles
• Select X, Y, Z axis independently
• Stand-alone sensor
• Sensor stores ambient background and settings in non-volatile memory
• Remote control module for programming and additional relay contact output
• ULTRAMETER™ displays optimum sensitivity setting/crosstalk interference
• DETECT-ON-STOP™ allows detection only when a vehicle has come to a complete stop

Control Unit Specifications

• Power/fault indicator: Green LED
• Detect indicator: Red LED
• Outputs: SPDT relay/NPN (open collector)
• Output ratings: Relay: 1A @ 24VD—120VAC NPN: 50 mA (max)
• Connection: 10 position screw termina
• Housing: ABS
• Environmental rating: IP30
• Power supply: 12-30 VDC and 24 VAC
• Current draw: 40 mA max
• Dimensions: 76mm (3.0") x 22mm(0.9") x 70mm(2.75")

Sensor Specifications

• Outputs: NPN (open collector)
• Output ratings: 50 mA
• Connection: 5 conductor direct burial
• Housing: DB: PVC; FP: Polyamide
• Environmental rating: IP69K
• Power supply: 12-30 VDC
• Current draw: 10 mA max
• Dimensions: DB:102mm (4.0") x 27mm (1.0"); FP: 86mm (3.4") x 21mm (0.9") x 8mm (0.3")

Control Unit & Sensor Specifications

• Sensing technology: 3-axis magnetoresistive
• Sensitivity: 10 levels: 0-9
• Axis sensitivity: 512 counts/gauss (typical)
• Environmental tracking: Automatic compensation
• Local magnetic field nulling: Averages local field signature in any sensor orientation
• Detection range: 1.5m (5ft.)
• Pulse/presence: Allows the relay/NPN output to send either a pulse output or have constant presence
• Detect-On-Stop: Requires vehicle to stop for a minimum of 1 second (1-2s typical)
• Operating environment: -40°C—82°C (-40°F—180°F)
• Supply protection circuitry: Reverse polarity and fuse protected

Logic Interface Specifications

• Power indicator: Green LED
• Detect indicator: 2x Red LEDs
• Configuration selector: 10 position rotary switch
• Outputs:
• Relay 1: SPDT (form C)
• Relay 2: SPST (form A):
• Output ratings: 1A @ 24 VDC/120 VAC
• Operating environment: -40° C—82° C (-40° F—180° F) 0—95% relative humidity
• Housing material: ABS
• Enclosure: IP30
• Power: 12-30 VDC and 24 VAC
• Operating current (standby/detect):
• One sensor connected: 22/35mA
• Two sensors connected: 33/60mA:
• Supply protection circuitry: Reverse polarity and fuse protected
• Dimensions: 73mm (2.9") x 38mm (1.2") x 78mm (3.1")
• Connector: 11 pin male connector (JEDEC B11-88)
• MADE IN USA